Continuous Recording - Magellan MiVue 260 Mode D'emploi

Date fields
ƒ
Time fields
ƒ
Use and
Recording in driving mode.

Continuous recording

When you connect the car charger to your vehicle's Vehicle Power Adapter (VPA),
the dashcam starts Continuous recording automatically. The recording is divided
into individual 130MB video clips, and recording doesn't stop between clips.
Your dashcam automatically stops and saves the recording when the vehicle
engine is turned off. Then, your dashcam turns off automatically. To stop recording
manually, press
When recording is not in progress, manually start Continuous recording at any
time by pressing
1 2 3 4
8 7
Note: If Continuous recording is ongoing, but there isn't enough space on your
memory card, new video clips will replace the old ones.
Note: When not recording, open the Video menu by pressing
to select a setting > press
.
. To stop recording, press
5
Current operation mode
1
Image resolution
2
Microphone status
3
Memory card status
4
6
.
.
5
6
7
8
11
Battery power status
Elapsed time of
recording; remaining
time for recording
Current time
Current date
.