Operating Your Dashcam - Magellan MiVue 260 Mode D'emploi

4

Operating Your Dashcam.

Note: DO NOT remove or insert the memory card while recording.
Connect the recorder to the car charger according to the Setting Up Your Dashcam
section.
Setting the date and time.
To make sure of the correct date and time stamp for your recordings, check the
date and time settings before you begin recording.
1. When not recording, press
2. Select Date/Time > press
3. Select Set > press
4. Press the Power key repeatedly to change the setting fields.
Date format
ƒ
5
twice to open the Setup menu.
.
.
10
6