MyKronoz ZeBuds Mode D'emploi page 6

PAIRING
In order to pair your ZeBuds with your smartphone, please follow the below instructions:
•
Open the charging case and take out both earbuds. The white LED on either earbud will
start flashing slowly to indicate it is in pairing mode
•
Go to the Bluetooth
•
Select "ZeBuds" in the list to initiate pairing
•
Once pairing is confirmed, white LED on either earbud will stay solid state for one
second then turn off
•
Your left and right earbuds will connect to each other automatically thanks to the TWS
technology in order to provide you with Wireless Stereo audio signal
•
You're now ready to enjoy your new ZeBuds
Note: You can independently use your left or right earbud by storing the one you don't
want to use back in the charging case. The Bluetooth
stop after 5 minutes of searching for device. To resume the pairing mode, please put both
earbuds back in the charging case for a few seconds then take them out again.
HOW TO PAIR WITH ANOTHER SMARTPHONE
To pair your ZeBuds with another phone, please first forget ZeBuds from your smartphone's
Bluetooth list, then perform a new pairing procedure with another smartphone.
®
® settings of your smartphone and search "ZeBuds"
® pairing mode will automatically