Kalorik USK BL 16909 Mode D'emploi page 6

All manuals and user guides at all-guides.com
Remove the jar from the base. Then remove the lid and pour the
•
liquid in the desired receptacle.
HOW TO CLEAN
Always unplug from outlet before cleaning.
•
For a quick rinsing of the pouring jar (for example between two
•
preparations), you can use clear water and switch on your
appliance for a few seconds. In this case, do not use any
detergent.
For a full cleaning, remove the jar from the motor block and turn
•
the blade fixing ring on the bottom of the jar anti-clockwise to
detach the sealing ring and the blade (this will make the
cleaning easier). Then you can clean these parts with soapy
water and rinse thoroughly with clear water. Dry before
assembling. To attach the blades, put the sealing ring around the
blades, insert them in the bottom of the jar and tighten the fixing
ring by turning it clockwise (tighten vigorously in order to avoid
leaks). Caution, do not lose the seal during this operation.
You can wipe the motor block with a soft damp cloth.
•
IMPORTANT : the borosilicate jar of your blender is designed to
•
support sudden temperature variations up to 50°C / 125°F. After
preparing an icy preparation, it is important to avoid cleaning the
jar with very hot water immediately afterwards, or the glass may
shatter. Likewise, after preparing a hot preparation like soup,
please do not rinse with very cold water immediately afterwards.
6
USK BL 16909/10/11 - 090602