Tecknet X300 Manuel page 5

Low Power Capacity Indication
The mouse and keyboard are equipped with
low power capacity indicator. When the
battery power gets low during use, the Low
Power Capacity Indicator (the DPI Switch
Button) on the top of the mouse and on right
top of the keyboard will flash. Please replace
the battery.
Note: we recommend you use AA alkaline dry cell
battery which supplies longer battery life.
Restoring Factory Default Settings (Manual Syncing Steps)
This product is equipped with an auto-syncing function. The USB
Nano Receiver and the Cordless Mouse will sync automatically once
they are activated. Should there be any problem while auto-syncing,
please employ the following steps to sync manually.
1. Ensure the battery voltage is correct; if the voltage is low, replace
the battery.
2. Press the right button and middle button (under the scroll wheel)
simultaneously (Do not release both buttons until you have
completed step 3); or press the key of ESC and K at the same time,
3. Plug the USB Nano receiver into a free USB port of your computer
within 15 seconds.
4. Then release both buttons.
5. After that the red scroll wheel LED will flash, the mouse will finish the
manual syncing and should work within 3-5 seconds. When
reconnect the keyboard, the lower power indicator will flash.
CAPS LOCK and NUM LOCK indication.
The keyboard has CAPS LOCK and NUM
LOCK indicators on the right top of keyboard.
The CAPS LOCK and NUM LOCK status are
indicated by the red LED lights.
Multimedia function key
The keyboard includes 8 multimedia function
keys for different multimedia experiences.
Attention
1. To maximize battery life, it is recommended
you use the mouse on a white or light
coloured surface.
2. If not used, the mouse will drop into auto-sleeping mode within 60
seconds, press any key or scroll wheel to activate the mouse.
3. Never use the mouse on a glass or mirrored surface as these
surfaces will cause the mouse to fail temporarily.
All manuals and user guides at all-guides.com
EN
Low Power Indicator