Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Do not install the components in locations where they might cause
All manuals and user guides at all-guides.com
interference to the operation of the vehicle controls.
•
If it is necessary to penetrate the firewall, check opposite side for
cable clearance before drilling and use a grommet to protect the
cable where it passes through.
Recommended Tools
The following tools are recommended for proper installation of your Car
Kit.
•
Portable Drill
•
Hammer
•
Center Punch
•
Phillips #2 Screwdriver
Junction Box Installation
In most vehicles, the best location for mounting the junction box is just
under the dash, or under the front seat. It must be protected from dirt and
moisture, and must be afforded adequate space for cooling. There must
also be sufficient space to allow for the connection of accessories.
to External
Speaker
Figure 2. Junction Box - Accessories Connection Diagram
CAR KIT OWNER'S MANUAL
to Phone Cradle
to External
to External
Microphone
PTT
to optional Palm
Mic
to Power
Cable
5
Publicité
Table des Matières
