Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 Mount Wallplate
Mount the new wallplate using the included screws and anchors.
If your box contains red anchors, drill 7/32" (5.6 mm) holes. If your box
contains yellow anchors, drill 3/16" (4.8 mm) holes.
6 Connect Wires
Simply match wire labels.
If labels do not match letters on the thermostat, check "Alternate Wiring" on
page 6 and connect to terminal as shown (see notes, below).
Thermostat does not work on Heat Pumps with auxiliary/backup heat.
INSERT WIRES
AND TIGHTEN
SCREWS
SCREW
We are here to help. Call 1-800-468-1502 for wiring assistance.
W/
Not
Used
Aux
WIRE
HOLE
LABELED
WIRES
Not
W
Used
M32732
5
M32714
Remove metal
jumper if you
have both
and
R
wires.
Rc
Publicité
Table des Matières
