Table des Matières
Publicité
S t a g e L i g h t i n g
LP-LED2X & LP-LED4X.
The Yorkville Sound LP-LED2X and LP-LED4X are compact and powerful lighting systems. The LP-LED2X
uses 2 lighting fixtures (LP-LED4X has 4), called pods, mounted on a stand-mountable bar/controller. The bar
houses the user controls, the connectors for a separate controller, the power supply and mounting options.
Each light pod uses 4 very high-power multi-die LED emitters that comprise of a red, a green, a blue and a
white die. The addition of the white die provides a much more complete light spectrum; more accurate color
rendering of the objects and/or people illuminated.
The light output of each pod is roughly equivalent to 300 watt bulbs with gels. At a distance of 6 feet, the light
beam has a diameter of 3 feet. The diameter of the light at 12 feet is 5 feet. The light is mixed in the lens so that
the mixed light color is visible when looking at the lens. Each pod may be adjusted in 2 axis.
The Bars May be Used in Several Ways
1. Stand alone, no separate controller is required
2. Linked to other LP-LED/X Bars with one as master
3. With a Yorkville Lighting Controller. The Yorkville Sound LP-C12 controller allows for more functionality
When a Yorkville Sound Color Controller is used, the controls on the LP-LED/X Bars become inactive
except for the Brightness Control.
4. With a DMX™ Controller. The DMX™ signals pass through internal integrated DMX™ processing via a
5. Bluetooth Smart™ device. Using our dedicated Android and iOS apps via any Bluetooth Smart™ enabled
Function and Stand Alone Operation
The Function Control allows you to set the basic operation of the LP-LED/X Bars. It allows you to power the
unit on, off, choose Bluetooth™ operation or set a manual setting. When an LP-LED/X Bar is operated by itself
(stand alone) there are a number of modes which are set by the Function control:
• OFF (2 identical positions)
• Lamp Color control (3 identical positions)
• Bluetooth™ operation 4 separate settings (A, B, C, D)
• Chase (5 speeds)
• Single Color fade (6 speeds)
• Multi Color fade (4 speeds)
• Audio effects via internal microphone (4)
• Audio effects via ¼-inch jack triggering (4) (inserting a jack
1
than the LP-LED/X Bars on their own. The older Yorkville Sound LP-608 can also be used but has limited
functionality (see more detailed description below).
3-pin standard XLR. Five separate modes are available with DMX512 addressing standard protocol. Set
unit to off position to in order to access DMX.
device. Effects and full manual RGBW color controls are available, along with extended Bluetooth™
effects such as strobe.
bypasses the internal microphone)
LP -LED/X
Function
Publicité
Table des Matières
