Others; Important; Technical Support - Lars & Ivan Hybrid Mode D'emploi

Others

The section describes the care and maintenance tasks that must be performed to optimize the operation of
your Lars&Ivan component.
Cleaning of equipment external surfaces
The exterior finish of your unit will last indefinitely with proper care and cleaning.
Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., dye solution), alcohol,
thinner, benzine, insecticide or other volatile substances as these will affect the finish of the equipment.
Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external
surfaces with a soft, lint-free cloth.
A note about recycling
This product's packaging materials are recyclable and can be reused.
This product and the accessories packed together are the applicable product to the directive except batteries.
Please dispose of any materials in accordance with your local recycling regulations. When discarding the unit,
comply with your local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations
concerning chemical wastes.
Warranty
For warranty information, contact your local Lars&Ivan distributor.
retain your purchase receipt
Your purchase receipt is your permanent record of a valuable purchase.
It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding
with Lars&Ivan.

Important

When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase.
Your purchase receipt or invoice is adequate for such proof.
CE marketing
The Hybrid is in conformity with the EMC directive and low-voltage directive.

technical support

Please contact your local distributor found @ http://www.lars-ivan.com
12