Fabric/Setting Chart - Proctor Silex 17150 Utilisation Et Entretien

Fers à vapeur
Masquer les pouces Voir aussi pour 17150:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

840091400 ENv01.qxd 12/12/01 11:05 AM Page 6
Features
(not all features on all models)
Spray and Blast of Steam Buttons
Push spray button to release a fine spray
of water for difficult wrinkles in cotton or
linen. Push blast button for an extra blast
of steam.

Fabric/Setting Chart

Setting
To Iron
0
Off
Acetate, Silk
1
2
Acrylic, Nylon
3
Polyester, Rayon
4
Cotton Blends
Wool
5
6
Cotton
7
Linen
All manuals and user guides at all-guides.com
Blast of
Spray
Steam
Ironing Instructions
Dry iron on the wrong side of
the fabric.
Dry iron using spray if necessary.
For polyester, dry iron while the
fabric is still damp.
Iron using steam or spray for
difficult wrinkles.
For wool, use a press cloth and
steam iron on the wrong side.
Iron cottons while still damp,
using steam and/or spray.
Iron on wrong side of fabric
while still damp.
6
Caring for Your Iron
Iron
1. Turn temperature control dial to Off. Unplug and let cool.
The iron takes longer to cool down than it does to heat up.
2. To empty water from iron, slowly tilt pointed end of iron
down over a sink. Water will run out of water tank opening.
3. Wrap cord loosely around iron and store iron in an upright
position. Do not store iron laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
Troubleshooting
Won't heat.
• Is the iron plugged in and the outlet working? Check the
outlet by plugging in a lamp.
• Is the Temperature Control Dial turned to a fabric setting?
• If auto shutoff model, is the Automatic Shutoff Light blink-
ing? If so, push Reset Button to reset.
Water is leaking.
• Do not overfill the water tank.
• If steam ironing, is the Temperature Control Dial in the
steam range and did the iron have enough time to preheat?
• If dry ironing, make sure the Adjustable Steam Switch is in
the 0, dry iron position.
7

Publicité

Table des Matières
loading

Table des Matières