840091400 ENv01.qxd 12/12/01 11:05 AM Page 2
IMPORTANT SAFEGUARDS
When using your flatiron, basic safety precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Use iron only for its intended use.
2. To protect against risk of electric shock, do not immerse the iron
in water or other liquids.
3. The iron should always be turned to OFF before plugging or
unplugging from outlet. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to disconnect.
4. Do not allow cord to touch hot surfaces. Let iron cool completely
before putting away. Loop cord loosely around iron when storing.
5. Always disconnect iron from electrical outlet when filling with water
or emptying and when not in use.
6. Do not operate iron with a damaged cord or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron. Call our toll-free customer service number for
information on examination, repair or electrical or mechanical
adjustment. Incorrect reassembly can cause a risk of electric shock
when the iron is used.
7. Close supervision is necessary for any appliance being used by or
near children. Do not leave iron unattended while connected
or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a steam iron upside down–there may be
hot water in the reservoir.
SPECIAL INSTRUCTIONS
1. To avoid a circuit overload, do not operate another high wattage
appliance on the same circuit.
2. If an extension cord is absolutely necessary, a 10-ampere cord
should be used. Cords rated for less amperage may overheat.
Care should be taken to arrange the cord so that it cannot be
pulled or tripped over.
SAVE THESE INSTRUCTIONS!
All manuals and user guides at all-guides.com
2
Consumer Safety Information
This product is intended for household use only.
This appliance is equipped with a polarized plug. This type of plug
has one blade wider than the other. The plug will fit into an electrical
outlet only one way. This is a safety feature intended to help reduce
the risk of electrical shock. If you are unable to insert the plug into
the outlet, try reversing the plug. If the plug should still fail to fit,
contact a qualified electrician to replace the obsolete outlet. Do not
attempt to defeat the safety purpose of the polarized plug by modi-
fying the plug in any way.
Pièces et caractéristiques
1. Water Tank Opening
2. Adjustable Steam
Switch
3. Spray/Blast Buttons
4. Swivel Cord
5. Heel Rest
6. Temperature
Control Dial
7. Power On Light
8. Soleplate
9. Water Window
1. Orifice de remplissage
du réservoir
2. Commutateur de réglage
de la vapeur
3. Boutons de vaporisation
et de jet de vapeur
4. Cordon pivotant
3
5. Talon d'appui
6. Cadran de réglage de la
température
7. Témoin de fonctionnement
8. Semelle
9. Repère de niveau d'eau