Rupes KR2 Mode D'emploi page 8

ENGLISH
SYMBOLS
Ø
PACKAGE HANDLING INSTRUCTIONS
The machine is packaged in n. 1 box with the following
dimensions and weight: cm 103x67x155h - 130 kg made up of:
- wooden platform;
- corrugated cardboard covering;
- binding straps.
The box must be handled and stored in the upright position. Do
not place any objects on the package that weigh more and/or
have a different sized base than the package.
Unpacking and disposal of packing material.
Before unpacking, carefully examine the condition of the parcel,
if there is any damage, signs of it having been opened or
missing documentation in the document envelope affixed to the
outside, then proceed no further. In this case the delivery must
be refused with appropriate notification to the carrier.
The non-observance of this requirement will nullify the
guarantee.
To unpack the machine:
- cut the binding straps;
- remove the corrugated cardboard covering;
- take the machine off the wooden platform;
- remove the bag containing the accessories.
Inspection of package contents
The package contains:
- the machine equipped with power cord;
- 1 vacuum hose ;
- 3 dust bags (12);
- 1 two-way link (29)
8
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Warning symbol / warning
Read instruction manual
Wear eye protection
Wear ear protection
Wear a mask
CE compliant
EurAsian Mark
Diameter
Arrow
Size of drill bits, grindings wheels...
Action in the direction of arrow
For packaging waste disposal attain to local regulations
in force, including recycling disposal if requested.
WARNINGS
Safety and accident prevention instructions
- This machine can only be operated by trained people in
charge; machine not intended to be operated by kids or
mental-sensorial defective people;
- before use, users should be provided with information,
instruction and training for the use of the appliance and the
pollutant it is used for, including the right method for the safe
removal and disposal of the substances collected;
- it is necessary to provide an adequate air change rate in the
room if the exhaust air is returned in the room. Reference to
National Regulations is necessary;
- the temperature of the work area must be between 10°C and
35°C with humidity between 50% and 90%;
- the surface on which the machine rests must not exceed a
maximum 10 degree gradient;
- always unplug the machine when not in use, before
maintenance or cleaning, and before replacing the dust bag
or filters;
- do not pull the power cord to unplug the machine;
- keep the power cord away from heat, oil and sharp edges;
- in the event of a blackout, turn the tool switch in OFF position
to avoid accidental start when power come back;
- do not expose the machine to rain and low temperatures;
- do not lift and transport the machine by the handle with a
lifting device.
ISO7010 - W001
ISO7010 - M002
ISO7010 - M004
ISO7010 - M003
ISO7010 - M016
8