switel HS 1000 Guide Rapide page 4

Additional cam HS 1000
1
The full functionality of this
additional camera we only
guarantee in connection with
the SWITEL Monitor System
HS 1000.
2
ENGLISH
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
WARNING!
Safety information
 Risk of explosion!
 Only use the power adapter plugs supplied!
 Only use batteries supplied or ones of the same type!
 Always treat batteries with due care and attention and only use
batteries as described.
 Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged. Never charge the batteries.
 Risk of suffocation through small objects, packaging and protective foil!
 Keep children away from the product and its packaging!
 Risks to health and the environment from batteries!
 Never open, damage or swallow batteries or allow them to pollute the
environment. They could contain toxic and ecologically harmful heavy
metals.
 Never use the units in the vicinity of medical equipment. Effects on
such equipment cannot be fully ruled out. Please observe a minimal
distance of 2.5m to sources of interference such as televisions or
computer screens.
 Risk of fire through power adapter plugs! Power adapter plugs can heat
up. Never leave any objects on the power adapter plugs. Ensure
access to power adapter plugs is not obstructed by furniture or such.
 Risk of tripping due to improperly laid cable! Lay the cables so that
nobody can trip over them!
ATTENTION!
 Prevent exposure to environmental influences, e.g. smoke, dust,
vibration, chemicals, moisture, heat and direct sunlight.
 Only allow repairs to be completed by qualified personnel.
 Remove the power adapter and battery during long period of non-use.
PACKAGE CONTENTS
1 Camera, 1 Power adapter plug, 1 Operating instruction, 1 Camera stand,
1 Mounting kit
INTENDED USE
The camera serves a video stream to the monitor. Any other use is
considered unintended use. Unauthorised modification or reconstruction is
not permitted. Under no circumstances open the devices or complete any
repair work yourself. Observe all local directives and regulations.
NOTE: Avoid installing in a location that requires the wireless signal to
pass through cement, concrete, or metal structures. This will reduce the
transmission range.
OPERATING ELEMENTS
1 Antenna
2 Camera stand
CAMERA SETUP
Before installing camera, carefully plan where and how it will be po-
sitioned, and where you will route the cable that connects the camera
to the power adapter
 Cameras are rated for indoor/outdoor installation, but are not intended
for direct exposure to rain or snow. For outdoor applications install
under shelter protected from the elements.
 Wireless cameras require a power source to operate.
 Ensure power outlets are sheltered from the elements.
 Use the included mounting screws to attach the camera stand to the
mounting surface
 Mark the positions of the screw holes on the mounting surface with the
base of the mounting stand.
 Drill holes and insert the drywall anchors (included) as needed.
 Firmly attach camera to the surface using the included screws.
If you run the power cable through the mounting surface, connect
power before attaching the camera to the wall.
 Attach the camera stand to the camera.
 Loosen the adjustment ring on the metal
camera stand and move the camera to the
desired position.
Tighten the adjustment ring when finished,
holding the camera firmly in position.
 Connect one end of the camera's power adapter to the camera and the
other end to an electrical outlet or surge protector. Make sure the power
connector is fully inserted to avoid water getting in the plug.
 Remove the protective film from the front of the camera. If the film is
not removed, it will affect picture quality.
PAIR AN ADDITIONAL CAMERA
 Connect the new camera to a power outlet. Place the camera and the
monitor within 1ft of each other.
 Press then select the Camera Setting icon. Press OK to confirm.
 Select Pairing and press OK.
 Use the arrow keys on the receiver to select the channel you want to
pair the camera to. Channels that are paired to an existing camera
show the statement PAIR OK, while open channels show NO PAIR.
Press OK on the desired channel to begin pairing.
If you pair a new camera to a channel that is already being used by an
existing camera, the new camera will be connected to that channel. The
old camera will automatically be disconnected.
 Following the onscreen prompt (the selected channel shows the
statement PAIRING), press the Pair button behind the camera. You
have 30 seconds to press the Pair button on the camera. If pairing was
successful, the pairing channel shows the statement PAIR OK.
 Do not press and hold the Pair button!
 Press until you have exited all menus. You can now view live video
from the camera by selecting the channel using the arrow keys on the
monitor.
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF 2.60/min). In the case of claims under the terms of guarantee, contact
your sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any
cleaning agents or solvents.
Guarantee
SWITEL equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply when a device malfunction was
caused by the mobile telecommunications network operator/provider. The
terms of guarantee do not apply to the batteries or power packs used in the
products. The period of guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the period
of guarantee will be redressed free of charge. Rights to claims under the
terms of guarantee are annulled following tampering by the purchaser
or third parties. Damage caused as the result of improper handling or
operation, normal wear and tear, incorrect positioning or storage, improper
connection or installation or Acts of God and other external influences
are excluded from the terms of guarantee. In the case of complaints, we
reserve the right to repair defective parts, replace them or replace the
entire device. Replaced parts or devices become our property. Rights
to compensation in the case of damage are excluded where there is no
evidence of intent or gross negligence by the manufacturer. If your device
does show signs of a defect within the period of guarantee, please contact
the sales outlet where you purchased the SWITEL device, producing the
purchase receipt as evidence. All claims under the terms of guarantee in
accordance with this agreement can only be asserted at the sales outlet.
No claims under the terms of guarantee can be asserted after a period of
two years from the date of purchase and hand-over of the product.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic and
electrical devices, owners are obliged to dispose of old electronic
and electrical devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge. The symbols indicate that the batteries must not be disposed
of in normal domestic waste and that they must be brought to collection
points provided by local public waste authorities. Packaging materials must
be disposed of according to local regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity. Conformi-
ty with the above mentioned directive is confirmed by the CE mark on the
device. To view the complete Declaration of Conformity, please refer to the
free download available on our web site www.switel.com.
Technical data (All rights reserved)
Feature Value
HS 1000 Operating range: Outdoor max. 150 m, indoor max. 50 m
W x H x D 138 x 232 x 78 mm
Weight 340 g (without stand)
Frequency 2,400 ~ 2,4835 GHz
Operating Temperature 14 ~ 122°F / –10 ~ 50°C
Camerasensor 1/4" CMOS
Power adaptor plug
Using the energy-efficient power adaptor model (6V DC 800mA ±5%)