Troubleshooting; Need Help - Lorex Baby SWEET PEEP Mode D'emploi

Troubleshooting

Problem
No video displayed on
the monitor
Monitor screen keeps
turning off
The camera is not
detected; "Out of Range"
is shown on the monitor
Feedback / squealing
noise coming from the
monitor

Need Help?

Product Support is available 24/7 including product
information, user guides, quick start guides, and FAQ's at
www.lorexbaby.com/support.
Solution
• Press and hold the button
to power on the monitor.
• Monitor is out of batteries. Plug
in the monitor power adapter.
• Video Off or VOX mode is on.
Press any button to turn the
screen back on.
• The channel has been disabled.
See "Changing Channels" on
page 8 for details.
• VOX mode is on. See "Using
VOX Mode (Voice Trigger)"
on page 17 for details on
disabling VOX mode.
• The monitor battery is low. Plug
in the monitor power adapter
• Wrong channel selected. Press
repeatedly to select the
channel.
• Make sure the camera is
powered on.
• The camera and monitor may
be out of range. Extend the
antenna on the monitor or move
the monitor and camera closer
together.
• You may need to pair the
camera and the monitor
again. See "Pairing Additional
Cameras" on page 19 for
details.
• Your camera and monitor may
be too close to each other.
Move them further apart.
• Press to lower the monitor
volume.
• For optimal performance, avoid
placing the monitor and camera
near televisions, computers,
cordless/mobile phones, or
other electrical equipment.
22