Pairing Additional Cameras - Lorex Baby SWEET PEEP Mode D'emploi

Pairing Additional Cameras

The camera(s) included have already
been paired with the monitor. If you have
purchased additional add-on cameras (model#
BB2415AC1 or BB2411AC1), OR if your
monitor and camera are not paired up, follow the
steps below.
Place the camera and monitor next to each
1
other. Ensure that the monitor and camera
are both powered on.
2
Press and hold until
is shown.
Press or
3
would like to pair the camera to.
If a camera is already connected to
this channel, the new camera will
replace the existing camera.
4
Press to begin pairing
The link LED flashes to show
that pairing mode is on.
C1 9
to select the channel you
19