Important - Samsung AMW8113ST Manuel Du Propriétaire

Auto Cooking Presets
The Auto Sensor allows you to cook your food automatically by detecting
the amount of moistures generated from the food while cooking.
• When cooking food, many kinds of moistures are generated. The Auto
Sensor determines the proper time and power level by detecting these
moistures from the food, eliminating the need to set the cooking time
and power level.
• When you cover a container with its lid or plastic wrap during Cooking
Presets, the Auto Sensor will detect the moistures generated after the
container has been saturated with steam.
• Shortly before cooking ends, the remaining cooking time will begin its
count down. This will be a good time for you to rotate or stir the food for
even cooking if it is necessary.
• Before auto Cooking Presets food may be seasoned with herbs, spices
or browning sauces. A word of caution though, salt or sugar may cause
burn spots on food so these ingredients should be added after cooking.
• The More/Less function pad is used to increase or decrease cooking
time. You should use this function to adjust the degree of cooking to suit
your personal taste.
Utensils & cover for Cooking Presets
• To obtain good cooking results with this function, follow the directions
for selecting appropriate containers and covers in the charts in this
book.
• Always use microwave-safe containers and cover them with their lids
or with plastic wrap. When using plastic wrap, turn back one corner to
allow steam to escape at the proper rate.
• Always cover with the lid intended for the utensil being used. If the
utensil does not have its own lid, use plastic wrap.
• Fill containers at least half full.
• Foods that require stirring or rotating should be stirred or turned toward
the end of the Cooking Presets cycle, after the time has started to count
down on the display.
AMW8113ST_XAC_DE68-03479H_EN+CFR.indb 20
All manuals and user guides at all-guides.com

Important

• It its not advisable to use the auto Cooking Presets feature on a
• Install the oven in a well ventilated location for proper cooling and airflow
• To avoid poor results, do not use the Auto sensor when the room
• Do not use volatile detergent to clean your oven. Moisture resulting from
• Avoid placing the oven near high moisture or gas emitting appliances,
• Always keep the inside of the oven clean. Wipe all spills with a damp
• This oven is designed for household use only.
20
continuous cooking operation, i.e. one cooking operation immediately
after another.
and to ensure the sensor will operate accurately.
ambient temperature is too high or too low.
this detergent may affect the sensor.
since this will interfere with the proper performance of the Auto Sensor.
cloth.
2011-02-16 4:49:49