Power Management Function; Turntable Operation; Bluetooth Operation - 1byone Audio-Technica AT3600 Manuel D'instructions

Main Power Connection
EN
1. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the back of the
DE
turntable.
FR
2. Plug the AC adapter into a normal power outlet.
Note: Do not plug the AC power adapter into a power outlet before all turntable
ES
assembly is completed. Before turning on turntable power, recheck all connections to
make sure they are correct and secure. Always turn off the turntable before connecting
IT
or disconnecting from power.

Power Management Function

The turntable will automatically go into standby mode after 15 minutes of inactivity.
To resume operation, press and hold the Mode button for 3 seconds.
Operation Instructions

Turntable Operation

1. Connect the included power adapter to the turntable and slide the Power Switch to
the "ON"position.
2. Remove the stylus protector from the stylus.
3. Press the MODE button to choose turntable mode. Red indicator light indicates
Turntable mode, blue indicator light indicates Bluetooth mode.
4. Place the record on the slip mat. If using 45RPM records, put the
45RPM adapter on the center spindle before placing the record on
the platter.
5. Press the 33 or 45 RPM speed button according to the type of record.
6. Press the Play/Stop button, the platter will start turning.
7. Unlock the tonearm clip and set the tonearm lift lever to the up position.
8. Position the tonearm over the desired location (groove) on the record.
9. Move the tonearm lift lever to the down position to move the tonearm toward the
record. Alternatively, place the needle cover over the desired location on the record.
10. Carefully lower the tonearm on the record.
11. When you are finished playing the record, raise the tonearm, return it to rest on the
arm clip and press the Play/Stop button to stop.
NOTE: If the silent pause time between each track is longer than 1 minute, the platter
will stop spinning automatically to avoid damaging the record. That doesn't mean the
turntable is a defect.
All manuals and user guides at all-guides.com
45RPM Adapter
8

Bluetooth Operation

1. Connect the included power adapter to the turntable and slide the Power Switch to
the "ON"position.
2. Press the MODE button to choose Bluetooth mode. Red indicator light indicates
Turntable mode, blue indicator light indicates Bluetooth mode. You will hear an
activation sound from the turntable.
3. Turn on the Bluetooth feature of your media device and search for and select
"1byone BS017" to pair the media device and turntable.
4. Once your media device is successfully paired with the turntable, the turntable will
play a short confirmation sound.
5. Play and stream music from your media device to the turntable.
Note: Bluetooth version: 4.2
Recording the LP into PC through USB Port
For installing and recording step please reference to the BRIEF INTRODUCTION OF
AUDACITY. http://audacity.sourceforge.net/
Recording the vinyl to your computer:
1. Follow the detail step as above Turntable Operation to play the vinyl.
2. Double click the Audacity and follow the record steps showing on the BRIEF
INTRODUCTION OF AUDACITY.
Audacity and USB Connection
It supports Windows95/Window XP/Window 7/Vista or more advanced version, with
the EMS memory more than 128MB and Audacity take space of 5MB.
Instruction for PC Encoding
1. Software instruction
1.1 Connect the USB cable with your turntable and your computer.
No extra driver is required.
1.2 Download the Audacity software from http://audacity.sourceforge.net/
Follow the instructions to complete installation.
9
EN
DE
FR
ES
IT