Delivery Content; Explanation Of Symbols; Safety Instructions - TOOLCRAFT 1553060 Mode D'emploi

Operating instructions
Gas burner
Item no. 1553060 Flambé burner 1300 °C
Item no. 1553061 Crème brûlée set
Intended use
The product produces an adjustable jet-flame with a max. temperature of 1300 °C. It has an
inbuilt piezo-ignition mechanism. The quantity of gas (flame size) and air volume (flame type)
are adjustable.
The product may only be filled and operated with lighter gas (isobutane gas).
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause a fire, explosions or other hazards. Read the instructions carefully and
store them in a safe place. Make this product available to third parties only together with its
operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.

Delivery content

• Gas burner
• Base
• 4x small ramekin (only item no. 1553061)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Please follow the instructions on the website.

Explanation of symbols

This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.

Safety instructions

Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we will assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The product is not a toy and it should be kept out of the reach of children. Keep
the product out of the reach of children. This applies to both during and after
operation. Keep the product in a place inaccessible to children! The same applies
to the gas container, which is used for refilling.
• The housing must not be opened or disassembled. It must not be held in or thrown
into a fire or open flames! There is a risk of explosion!
• Do not subject the product to heavy mechanical stress. The gas tank may
otherwise become unsealed. This can result in a fire or explosion!
• If the product should become damaged or defective, dispose of it correctly. You
may need to keep the product at a suitable outdoor location for a prolonged period
to allow any residual gas still contained in the product to escape. Ensure that there
is sufficient ventilation. Keep a distance to any open fires or ignition sources. This
can result in a fire or explosion! Keep a safe distance from flammable objects. This
constitutes a fire hazard!
• The product must not be operated, filled or stored in areas where explosive, easily
flammable materials, combustible gases, vapours, dust, or inflammable liquids
(solvents, alcohol, petrol, etc.) are stored or could be stored. There is the risk of
explosion or fire!
• Protect the product from dirt and damp. This will lead to damage to the product
or corrosion.
• Only move the product when it has completely cooled down. There is a danger of
burns and fire! The same applies to storing the product.
• The product may be transported or stored only in an upright position (feet down,
regulator up).
• For use in commercial institutions, the accident prevention regulations of the
employer's liability insurance company are to be observed.
• In schools, educational facilities, hobby and DIY workshops, the product must be
operated under the supervision of qualified personnel.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Filling
• Only fill the product after it has cooled down completely. Otherwise there is a
danger of explosion!
• If the hot-gas burner is damaged, it must not be refilled! This can result in a fire
or explosion!
• Fill your product only with commercially available lighter gas and only in a well-
ventilated environment. Avoid open flames when filling the product. There is a risk
of explosion!
• When filling, observe the safety and operating instructions of the gas cartridge
manufacturer.
• Stop the filling process immediately if gas escapes. A gas-air mixture could arise
which could explode. Make sure that the room has been well ventilated before you
ignite the product or other sources of ignition.
• Once filled, the product contains highly flammable gas under pressure. It must
therefore be kept away from heat sources, heat (> +40 °C) or direct sunlight.
Otherwise there is a danger of explosion!
• Never remove or open the filling valve to allow gas to escape. This can result in
a fire or explosion!
c) Operation
• Only hold the product by the grip. Always hold it so the flame nozzle points away
from you. Always hold it so that the grip points downward.
• Keep the product away from your body and clothing while igniting and during
operation.
• Never reach into the open flame! Never touch the hot metal parts of the hot-gas
burner! This will cause serious burns!
• Never leave the product unattended during use. This constitutes a fire hazard!
• Note that depending on the ambient lighting, the flame may be only poorly visible
or not visible at all.
• During breaks or to let it cool, place the product in the provided base. Place the
product on a stable, level surface. Make sure that it cannot tip over or fall off the
surface. This constitutes a fire hazard!
• Always ignite the flame for no more than 15-20 minutes at any one time; otherwise,
the housing of the hot-gas burner could heat up excessively. There is a danger
of burning!
• Never ignite liquid or gaseous fuels (e.g. benzines, spirits, etc.) with the product.
There is a risk of explosion!
• Depending on the activity for which you use the product, suitable protective
equipment and observation of additional safety precautions are necessary.
• Many materials give off biohazardous or even toxic vapours when heated. If
necessary, use a suitable venting system or ventilate sufficiently.
• Never try to cool down the product using water or other liquids. This will cause
damage to the product.