A-B Point Function
When playing MP3 or CD discs, press this button
once to mark an A point, then press the button
again to make a B point. The unit will repeat
playing the audio between point A and point B. Press the button
again to cancel.
Note: Point A and Point B must be within the same song.
Connection to AUX devices
In order to use this player in different settings, an AUX cable has
been supplied to connect this player to any device with an AUX
interface, such as: surround systems, home theatre, vehicles,
headphone amplifiers and other devices.
TROUBLESHOOTING
Problem
Possible reason
Switch is not
turned on
The player
cannot be
The built-in battery
turned on
is exhausted
The player is
damaged
Solution
Turn the OFF/ON button
on the side to ON
Charge the battery
Please contact us
Problem
Possible reason
15
The disc is installed
incorrectly
Discs cannot
be read
The disc is dirty or
damaged
The lens is dirty
There is no current
at the power outlet
The battery
The plug is not
does not
plugged in correctly
charge
The charger is
damaged
6
Solution
1. Make sure the labeled side of
the disc is facing up.
2. Ensure the disc is placed
securely
1. Make sure the disc is not
heavily scratched or damaged.
2. Wipe the disc gently from the
center to the outer edge with a
clean, soft cloth
3. Try another disc to check if the
original disc is faulty
Wipe the lens gently with an
alcohol cotton swab
Make sure that the power outlet
is working
Make sure that the two plugs of
the power cord are
connected properly
Replace the charger with
another one that matches the
specifications