Important - KLIM Discman Manuel D'utilisation

USER GUIDE
Inserting and removing discs
Push the OPEN button on the right to open the cover. Insert your
index finger into the center hole of the disc and take the edge of the
disc with your thumb. Keep the labeled side upward while inserting
the disc into CD player and press the disc gently to lock it in place.
Close the disc cover completely, otherwise the player will not read
the disc.
To remove an inserted disc, gently pull it upwards from the side.
Note: The player is only compatible with CD, CDR, Mp3, HDCD
formats.
Using earphones
Only earphones with a 3.5 mm jack are compatible with this device.
In order to experience the best sound quality, please use the
included KLIM Fusion or similar high fidelity headphones.
For reference, you may find the KLIM Fusion manual on our website
at www.klimtechs.com/manual
Turning on the player
The power switch is located on the side. Slide it to the ON position to
play normally. When the last track in a disc is played or there is no
disc in the unit, the player will enter standby mode after 20
seconds. Press the PLAY button again to restart the player.
Note: The power switch has a key lock function which is designed to
lock the operation of all the keys. HOLD will be displayed on the
screen at this time. Do not toggle the power switch to the HOLD
position before the operation is completed.
How to turn off the player
There are two ways to turn off the player:
1. Move the power switch to the OFF position if the player will not be
used for an extended period of time.
2.The player will enter standby mode by pressing the STOP button
twice in succession. On standby, the player will continue to consume
some power, since it is not completely switched off.
IMPORTANT: while on standby mode, press the Play/Pause button to
reactivate the player.
3
8