Cleaning And Care - Klarstein Rossa II Mode D'emploi

CLEANING AND CARE

Disassembling
1
Turn machine "O". Twist
the hopper to unlock
by grabbing the two
ejections. Make sure the
arrow is ali- gned with the
open sign before pulling
off the bowl. Order to
disassemble
Cleaning
• Do not use volatile liquids such as insect sprays.
• Excessive pressure when wiping may damage the surfaces.
• Rubber or plastic parts should not be in contact with the unit for long periods of
time.
• Repairs to the device should only be carried out by an authorized specialist
workshop.
2
Use the brush to clean
thoroughly after operating.
Do not use metal sponge
to clean, it will damage
the machine.Do not use
dish- washer to clean.
3
Do not rinse the base
with direct water, use
day towel or wet towel
to clean. Dry all the parts
thoroughly after cleaning.
EN
17