Sauder 410375 Instructions De Montage page 15

12
Do not fasten NAILS along this edge until the
BACK (I) is overlapping the LARGE BACK (H).
NAIL
(55 used in this step)
 Carefully turn your unit over onto its front edges. Unfold the LARGE BACK (H) and lay it over your unit.
 Make equal margins along all four edges of the LARGE BACK (H). Push on opposite corners of your unit if needed to make it
"square".
 Fasten the LARGE BACK (H) to your unit using the NAILS (AA). The NAILS should be 5-1/2" apart, 1-1/2" from the
corners, and 1/4" in from the edges. Also, be sure the NAILS are 1/2" from each fold line in the BACK.
 Repeat this step for the BACK (I).
All manuals and user guides at all-guides.com
I
AA
www.sauder.com/services
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
1/2"
H
1/4"
1"
1-1/2"
5-1/2"
410375