Power Fist CETL 3072101 Mode D'emploi page 5

8507667
VIBRATION PRECAUTIONS
This tool / work piece vibrates during use. Repeated or long-term exposure to vibration may cause temporary or
permanent physical injury, particularly to the hands, arms and shoulders.
1. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and
then have regular medical check-ups to ensure medical problems are not being caused by or worsened
from vibrations. Pregnant women or people who have impaired blood circulation to the hands, past hand
injuries, nervous system disorders, diabetes or Raynaud's Disease should not use tool's that vibrate. If you
feel any medical symptoms related to vibrations (such as tingling, numbness, and white or blue fingers),
seek medical attention as soon as possible.
2. Do not smoke during use. Nicotine reduces the blood flow to the hands and fingers, increasing the risk of
vibration-related injury.
3. Use tools with the lowest amount of vibration when there is a choice between different processes.
4. Do not use for extended periods. Take frequent breaks when using vibrating tools.
5. Let the tool do the work. Grip the tool as lightly as possible (while still keeping safe control of it).
6. To reduce vibrations, maintain the tool as explained in this manual. If abnormal vibrations occur, stop
using this tool immediately.
TOOL USE AND CARE
WARNING! Do not use the tool if the power switch does not function properly. Any tool that cannot be
controlled with the ON / OFF switch is dangerous and must be repaired.
1. Use the correct tool for the job. Maximise performance and safety by using the tool for its intended task.
2. Do not modify this tool or use for a purpose for which it was not designed.
3. This tool was designed for a specific function.
Do Not:
a. Modify or alter the tool, all parts and accessories are designed with built-in safety features that may
be compromised if altered.
b. Use the tool in a way for which it was not designed.
4. Avoid unintentional starts. Be sure the throttle is in the OFF position when not in use and before connecting
it to any power source.
5. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool
before connecting it. A wrench or key that is left attached to a rotating part of the tool increases the risk of
personal injury.
UNPACKING
1. Carefully remove the tool from the package and retain the packing material until you have carefully
inspected and satisfactorily install or operated the tool.
2. Inspect the parts carefully to make sure the tool was not damaged while shipping.
WARNING! If any part is missing, do not operate the tool until the missing parts are replaced. Failure to do so
could result in serious personal injury.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
Mini Milling Machine V 3.05
5