Lubrication - Power Fist CETL 3072101 Mode D'emploi

V 3.05
6. Use the wrenches provided with the unit. Do not make adjustments to the machine with unsuitable tools.
Do not use a hammer to strike the wrench in order to tighten components. Damage could result leading to
product failure.

LUBRICATION

Lubricate the following components of the machine:
Use Lubricating Oil
1 Base (H) and saddle seat slide face (F)
2 Saddle seat (F) and working table slide face (E)
3 Fuselage seat (M) and connecting strut slide
face (I)
4 Fuselage (M) and spindle box slide face (C)
Use Lubricating Grease
1 X-axis feeding screw (saddle seat)
2 Y axis feeding screw (working table)
3 Z axis feeding gear rack (fuselage)
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
14
All manuals and user guides at all-guides.com
Mini Milling Machine
For technical questions call 1-800-665-8685
8507667