Assembly And Operation; Applications; Removal And Installation Method Of Battery; Fig. 2 - Metabo HPT R 18DL Instructions De Sécurité Et Mode D'emploi

ASSEMBLY AND OPERATION

APPLICATIONS

○ Light-duty vacuuming of dry surfaces
REMOVAL AND INSTALLATION
METHOD OF BATTERY
○ How to install the battery.
Align the battery with the groove in cleaner
handle and slip it into place.
Always insert it all the way until it locks in place
with a little click, If not, it may accidentally fall
out of the cleaner, causing injury to you or
someone around you (Fig. 2).
○ How to remove the battery.
Withdraw battery from the cleaner handle while
pressing the latch (2 pcs) of the battery (Fig. 2).
Handle
Insert
<R18DL>
Handle
Push
Latch
<R18DSL>
CHARGING
For rechargeable batteries, please charge in
according to the handling instructions of the charger
which you are using.
Battery
(Optional accessory)
Push
Latch
Pull out
Pull out
Insert
Battery
(Optional accessory)

Fig. 2

BEFORE USE
1. Setting up and checking the work environment
Check if the work environment is suitable by
following the precautions.
2. Mounting and dismounting the guard and fi lter
Before using the appliance, check that the fi lter
is securely mounted. (Fig. 3)
Guard
Filter
Release button
Dust case
Ribs (6pcs.)
(1) Mounting
1 Match the outside diameter of the fi lter to
the inside diameter of the guard and insert
as far as the fi lter ring will go.
2 Match the shape of the guard (with the fi lter
attached) to the shape of the hole in the
dust case and insert as far as it will go (6
points).
(2) Dismounting
To dismount the guard and the fi lter, follow the
above procedures in reverse.
3. Attaching and removing the suction opening
Insert the suction opening into the suction port
of the appliance as required. (Fig. 4)
English
Knob
Knob
Guard
Filter
Knob
Fig. 3
9