INFOSEC UPS SYSTEM E3 PRO Manuel Utilisateur page 7

Step 4: Disable/Enable ROO/RPO function
Step 5: Turn on/off the UPS
Press the ON/OFF button on the front panel for two seconds to power on the UPS.
Step 6: Install software
For optimal computer system protection, install the UPS monitoring software to fully
configure UPS shutdown. You may insert provided CD into CD-ROM to install the monitoring
software. If not, please follow steps below to download and install monitoring software from
the internet:
1. Go to the website http://www.infosec-ups.com
2. Click ViewPower software icon and then choose your required OS to download
the software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange
plug icon located in the system tray, near the clock.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 17 AA 59 204 19
Contact open: UPS shuts down.
Contact closed: UPS start-up (UPS is
connected to AC power and AC power
is available).
Note: The local ON/OFF control by
pressing On/Off button overrides the
remote-control function.
Contact open: UPS shuts down and
Fault LED (3) will be ON.
To return to normal operation, de-
activate external remote contact (Fault
LED (3) will be OFF) and restart the
UPS by pressing button.
7