Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. SAFETY RECOMMENDATIONS
This chapter covers basic safety rules for using the machine. By working with the machine complies with the
instructions below:
•
Before starting up the machine please read the instructions and make sure safety norms are
respected. Learn how to stop the machine in a fast and safe way.
•
Start the machine only when you have mounted the safety guards that come with the machine.
•
It is recommended to use safety glasses, safety boots, gloves etc. Please always use approved
materials.
•
Always use Individual Protection Equipment (IPE) in accordance with the type of work you are
effectuating.
•
Prohibit strangers to access the place of work of the machine.
•
Work clothes are not supposed to have loose articles that can cling into movable parts of the
machine.
•
Electrical wires showing cuts and breaks should be replaced as soon as possible.
•
Do not use the machine with wet hands, under the rain or in damp places.
•
When you have to move the machine, unplug the electricity cables and block the moving parts of the
machine.
•
Work with the machine in well-lit.
9. ELECTRICAL CONNECTION
Upon receipt of the machine, make sure the network electrical tension is adequate before plugging the machine. The
electrical tension is to be found on the voltage indication next to the switch of the machine.
WARNING: Never plug the machine to electricity, in case the network power tension is not the adequate
as the engine would undergo irreparable damages
WARNING: Never manipulate power supply cables or any other electrical equipment on the machine
before you unplug the machine from electricity
If you use extension wires to power the machine, make sure they have a minimum cross-section as indicated by the
following table
> (10 feet) o (3 meters)
> (15 feet) o (5 meters)
> (30 feet) o (9 meters)
10. MAINTENANCE
To keep the machine always in perfect condition should regularly monitor the following:
• Keep clean the handles of the machine.
• Avoid to damage the mixing paddle to prevent vibration.
• Keep clean and speed selectors and the ON/OFF switch
All manuals and user guides at all-guides.com
WIRE LENGTH
Wire size /AWG)
-7-
110/115v
230v
Ø Nominal
16
1,0 mm²
14
1,25 mm²
10
1,5 mm²
ENGLISH
Publicité
Table des Matières
