d - CONFiGurATiON
App notification in the event of an alert: all
1
devices on which the camera was added
to the Visia app will be notified if there is
movement (the app must be running in the
background on the tablet or smartphone)
Saving to SD: if a micro SD card was inserted
2
into the camera, any alert triggers a video,
which is saved to the card. The video can be
viewed remotely (see below)
Email with attached photo: if email was set up
3
(see the previous paragraph), an email will be
sent when movement is detected
FTP options, not discussed here
4
Click on "Appliquer" (Apply) to save your
5
settings.
12
en
720P WiFi iP camera
1
2
3
4
Click here to activate motion detection
1
Use this to adjust the sensitivity of the
2
m otion detector. When set to high sensitivity
the smallest movement will send an alert, in
5
low sensitivity, only large movements on the
screen will send an alert
Click on "Appliquer" (Apply) to save your
3
settings.
This completes the configuration. From this point
on, any movement in front of the camera will
result in an email alert, a Visia app notification
and/or a file to be saved to the memory card,
depending on your settings.
1
2
3