Access To All Settings; Configuration; Example: Programming An Email Alert To Be Sent When Motion Is Detected - Avidsen 123288 Mode D'emploi

d - CONFiGurATiON

2 - ACCESS TO ALL SETTINGS

2.1 - Configuration

From the camera list, click on the icon
to the right of your camera's name to
display the configuration menus:
Changing the password to log in to the
1
camera ("admin", by default)
Activation/deactivation and sensitivity of the
2
motion detector
Actions to take if motion is detected:
3
notification, send an email, saving a file to the
memory card (requires a micro SD card [not
included] to be inserted into the camera)
10
en
720P WiFi iP camera
Activation/deactivation of continuous recording
4
to the micro SD card and the length of videos
(requires a micro SD card [not included] to be
inserted into the camera)
Volume of the microphone and speaker
5
Video quality settings and number of frames
6
per second. Warning: if you set the video
quality to high with respect to the quality of
the internet connection of your camera and
smartphone or tablet, you may experience
choppy video or loss of connection. Two
streams can be adjusted: they correspond to
the maximum resolution = "résolution Max",
and low resolution = "résolution faible",
which you can select from the live video
display.
1
Configure the camera's current WiFi settings
7
If a micro SD card has been inserted into the
8
2
camera, you can reformat it and display its
total and free memory
3
Setting the date and time stamps on the
9
camera's video
4
Settings for sending emails in the event of an
10
alert (see the example below)
5
Settings for saving to an FTP server
11
Remote camera restart
6 12
Camera network information
13
7
2.2 - Example: programming an email alert to
be sent when motion is detected
8
To program an alert to be sent when motion
9
is detected, you need 2 email addresses: the
10
address of the sender which will be used by
the camera, and the address which will receive
11
the alerts. The camera uses the username and
password of the sender address to connect and
12
send the email. Configuration depends on the
chosen email provider's settings.
13
Note: the 2 email addresses can be the same
(you will simply be sending an email to yourself).
In our example, we use
www.gmail.com:
sender-address@gmail.com sends the alerts,
recipient@gmail.com receives the alerts.
Both addresses need to have been created
beforehand.
First, go to "Réglages Email" (Email settings):