Télécharger Imprimer la page
MINN KOTA MKR-21 Guide Rapide
MINN KOTA MKR-21 Guide Rapide

MINN KOTA MKR-21 Guide Rapide

Port d'alimentation du chargeur intégré

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Convenient adapter that allows quick thru-hull connections to an AC extension cord – with no cutting or splicing of wires required – using
the AC plug from any Minn Kota charger. The splash resistant cover and gasket prevent corrosion on the AC plug when not in use.
Item /
Part #
Description
Assembly
p
CARD-WARNING, POWER PORT
p
FASTENER,WARNING CARD,PWR PORT
2
BASKET, POWER PORT, BLK *INCLUDES 6*
4
LUNE, POWER PORT, BLK
6
MAIN-PLUG, POWER PORT, BLK *INCLUDES 2*
8
COVER-PLUG, POWER PORT, BLK
10
SCREW, SS-POWER PORT
12
SCREW, PH-OVAL, SS
p
INSERT, BRASS-POWER PORT
TOOLS AND RESOURCES REQUIRED
• Drill
• Pen or similar marking tool
INSTALLATION
1
a.
Select a location on the boat that is at least 21"
away from all batteries and fuel fill lines.
NOTICE:
Before drilling holes check for wires and
supports on the area being drilled.
b.
Drill a 1/8" pilot hole in the center of the
selected location.
c.
Using the pilot hole, align a 1-7/8" hole saw to cut
the mounting hole.
d.
Place the AC Power Port in the 1-7/8" hole to mark
and drill holes for the 3 mounting screws.
e.
Put the AC cord through the 1-7/8" hole from the
inside the boat and place the AC plug into the AC
Power Port and tighten the 2 screws (Item #10).
f.
Mount the AC Power Port in place with the 3
Stainless Screws (Items #12) provided. Your new AC
Power Port is now ready for use.
Avoid serious injury or death from fire, explosion, or electrical shock. This device must be connected to a Ground Fault Circuit Interrupt
(GFCI) protected AC outlet. When using an extension cord, connect the AC charger before connecting to the GFCI protected AC outlet.
Make connection in a secure manner that will avoid contact with the water. TAG ONLY TO BE REMOVED BY CONSUMER.
1 | minnkotamotors.com
ON-BOARD CHARGER POWER PORT
Qty.
1
1
1
1
1
1
12
12
2
3
p Not shown on Parts Diagram.
2
✖ This part is included in an assembly and cannot be ordered individually.
• 1/8" drill bit
• 9/64" drill bit
1b
1/8"
Pilot
Pilot
Hole
Hole
1-7/8"
1-7/8"
1f
WARNING
6 6
4 4
10
10
• 1-7/8" hole saw
• Screwdriver
1e
9/64" Mounting
Mounting
Screw Hole
Screw Hole
Screws
Screws
9/64"
Mounting
Mounting
Cover
Cover
Screw
Screw
Plug
Plug
Hole
Hole
Stainless
Stainless
Steel Screws
Steel Screws
©2021 Johnson Outdoors Marine Electronics, Inc.
MKR-21
1865108
8
8
2 2
AC Plug
AC Plug
from
from
Charger
Charger
Basket
Basket
Lune
Lune
Main Plug
Main Plug
Stainless
Stainless
Steel Screws
Steel Screws

Publicité

loading

Sommaire des Matières pour MINN KOTA MKR-21

  • Page 1 Convenient adapter that allows quick thru-hull connections to an AC extension cord – with no cutting or splicing of wires required – using the AC plug from any Minn Kota charger. The splash resistant cover and gasket prevent corrosion on the AC plug when not in use.
  • Page 2 Adaptateur pratique qui permet des connexions rapides par la coque à une rallonge c.a., sans coupe ni épissure de fils, en utilisant la fiche c.a. de n’importe quel chargeur Minn Kota. Le couvercle résistant aux projections de liquide et le joint empêchent la corrosion sur la prise c.a. lorsque le chargeur n’est pas utilisé.

Ce manuel est également adapté pour:

1865108