Installation - Adagio GDP-8800 Mode D'emploi

Installation

COMPONENTS:
1. User's Manual
2. Guarantee Card
3. Piano legs
4. Pedal
5. M12 Screws
1
Place piano carton in the upright position, near
to its final placement position. remember to
always use 3 strong people when moving the
piano.
3
Using the provided bolts and tools,
tighten all 3 legs into their position
as shown, keeping the piano in a
vertical position. also assemble the
Pedal lyre and metal support
braces at this time .
22
All manuals and user guides at all-guides.com
Installation
3 pcs
1 pcs
8 pcs
4
Slowly and carefully turn the piano into the horizontal
position, being very careful that you have lifted the
piano high enough so that none of the legs or the pedal
assembly are caught on the floor when you are rotating
it. failure to do so may put too much weight on one of
the legs, causing it to crack
6. Wrench 1 pcs
7 Screw-driver 1 pcs
8. Preemergency Fuse 3 pcs
9. Piano Bench(Packed Individual)
2
Carefully take apart and remove the
packaging,
.