Pressure Wave PWH2500 Mode D'emploi page 10

TO USE SPRAY WAND
The nozzles for the spray wand are
stored in nozzle holder on the panel
assembly. Colors on the panel identify
nozzle location and spray pattern. See
chart to choose the correct nozzle for
the job to be performed.
CHANGING NOZZLES ON SPRAY
WAND
Risk of Flying
Object could
cause risk of serious injury. DO
NOT attempt to change nozzles
while pressure washer is running.
Turn engine off before changing
nozzles.
1.
Pull quick connect coupler back
and insert nozzle.
2.
Release quick connect coupler
and twist nozzle to make sure it
is secure in coupler.
Nozzle Color
Spray Pattern
powerful
pinpoint for
Uses
very intense
cleaning
Metal or
concrete
Surfaces *
DO NOT use
on wood
*
glass, automobile paint, auto striping and trim, and delicate objects such as
flowers and shrubs. Before spraying, check the item to be cleaned to assure
yourself that it is strong enough to resist damage from the force of the spray.
A12496
Red Yellow
0º 15º
intense
cleaning of
small areas
metal,
concrete, or
wood
The high pressure spray from your pressure washer is
capable of causing damage to surfaces such as wood,
risk of serious injury. Ensure nozzle
is completely inserted in QC socket,
and QC snap ring is fully engaged
(forward) before squeezing gun
trigger.
Do not direct discharge stream
toward persons, unprotected
skin, eyes, or any pets or animals.
Serious injury can occur.
White
40º low pressure
covers wide applies
areas of cleaning
cleaning solutions
metal, metal,
concrete, concrete,
wood, or vinyl wood, or vinyl
10- ENG
Risk of Flying
Object could cause
Risk of injection or
injury to person.
Black