Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning
•
Wash any removable parts of the freezer interior, and exte-
rior with mild detergent and warm water. Wipe dry. DO NOT
USE HARSH CLEANERS ON THESE SURFACES.
•
Do not use razor blades or other sharp instruments, which
can scratch the appliance surface when removing adhesive
labels. Any glue left from the tape can be removed with a
mixture of warm water and mild detergent, or touch the resi-
due with the sticky side of tape already removed. DO NOT
REMOVE THE SERIAL NAMEPLATE.
Door Removal (see Figure 5 below)
If the door must be removed to fit through narrow doorways, UN-
PLUG THE UNIT.
1. Gently lay freezer on its back, on a rug or blanket.
2. Remove the two grille screws and grille. Remove wire from
clips on bottom of cabinet.
3. Unplug connector, if required, by holding the cabinet connec-
tor in place, and pulling the door connector out.
4. Remove the bottom hinge screws.
5. Remove the plastic top hinge cover.
6. Remove the top hinge from cabinet.
7. Remove the door and bottom hinge from the cabinet.
8. To replace the door, reverse the above order and securely
tighten all screws to prevent hinge slippage.
All manuals and user guides at all-guides.com
INSTALLATION
Figure 5
Setting the Temperature Control
Cool Down Period
•
For safe content storage, allow four (4) hours for freezer to
cool down completely. The freezer will run continuously for
the first several hours. Contents that are already frozen may
be placed in freezer after the first few hours of operation.
Unfrozen contents should NOT be loaded into the freezer un-
til freezer has operated for four (4) hours.
•
When loading the freezer, freeze only three (3) pounds of
commodities per cubic foot of freezer space at one time. Dis-
tribute packages to be frozen evenly throughout the freezer.
It is not necessary to turn the control knob to a colder setting
while initially freezing commodities.
Temperature Control
The temperature control (see Figure 6 above) is located inside the
freezer. The temperature is factory preset to provide satisfactory
content storage temperatures. However, the temperature control
is adjustable to provide a range of temperatures for your personal
satisfaction. If a colder temperature is desired, turn the tempera-
ture control knob toward COLDEST and allow several hours for
temperatures to stabilize between adjustments.
5
Figure 6
Publicité
Table des Matières
