Electronic Equipment; Blasting Areas - Sony Ericsson HCB-300 Mode D'emploi

English
• If you will not be using the product for a while, store it
in a place that is dry, and dust free; and avoid
extreme temperatures.
• To reduce risk of electric shock, unplug the unit from any
power source before attempting to clean it.
Installation
Please note that only authorised personnel should install the
Bluetooth car handsfree. Please check with your car dealer for
recommendations on professional installation engineers. It is
recommended that the Bluetooth car handsfree be installed
under the dashboard of the car. The control panel of the
Bluetooth car handsfree should be installed on the dashboard
of the car, so that you can reach the keys from your normal
driving position. Some car manufacturers require that you use
an external antenna for your phone. Check with your car
manufacturer's representative to be sure that all equipment for
the Bluetooth car handsfree, including additional accessories,
are placed in a safe location. If your car is equipped with an air
bag, check that the handsfree equipment does not interfere
with its function. The Bluetooth car handsfree equipment is
made for use in cars with a 12 volt electrical system. Other
supply voltages may cause damage to the equipment.
Radio frequency exposure
Your Bluetooth car handsfree is a radio transmitter and
receiver. When in operation, it communicates with a Bluetooth
equipped mobile device by receiving and transmitting radio
frequency (RF) electromagnetic fields (microwaves) in the
frequency range 2400 to 2500 MHz. The output power of the
radio transmitter is low, 0.001 watt. Your Bluetooth car
handsfree is designed to operate in compliance with the RF
exposure guidelines and limits set by national authorities and
14
This is the Internet version of the user's guide. © Print only for private use.
international health agencies when used with any compatible
Sony Ericsson or Ericsson mobile phone.
Driving
Check the laws and regulations on the use of mobile phones
and handsfree equipment in the areas where you drive.
Always give full attention to driving and pull off the road and
park before making or answering a call if driving conditions so
require. RF energy may affect some electronic systems in
motor vehicles such as car stereo, and safety equipment.
Check with your vehicle manufacturer's representative to be
sure that your mobile phone or Bluetooth car handsfree will
not affect the electronic systems in your vehicle.

Electronic equipment

Most modern electronic equipment is shielded from RF
energy. However, certain electronic equipment is not,
therefore:
Do not use your Bluetooth car handsfree near medical
equipment without permission. If you are using any personal
medical device, such as a pacemaker or a hearing aid,
please check in your mobile phone's User's Guide for
related information.

Blasting areas

Turn off all your electronic devices when in a blasting area or
in areas posted turn off two-way radio to avoid interfering
with blasting operations. Construction crews often use remote
control RF devices to set off explosives.