Table des Matières
Publicité
sTeP 11:
(see fiGure 11)
•
Peel the adhesive backing off of the rubber bumpers
(U) and adhere a bumper (U) to the underside of
each of the two pivot catches (4).
•
Attach the pivot catches (4) to the hopper bag
assembly using 1/4-20 x 5/8 GR5 hex bolts (C) and
1/4-20 Nylock hex nuts (T).
C
4
U
T
C
4
U
T
fiGure 11
7
sTeP 12:
(see fiGure 12)
•
Place the hopper bag assembly over the sweeper
assembly and lock the bag into place by sliding over
the bolts on the lower kickstand tubes (3).
3
3
3
fiGure 12
Publicité
Table des Matières
