Table des Matières
Publicité
asseMBLY insTrucTiOns
TOOLS REQUIRED FOR ASSEMBLY
(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
Lay out and identify parts and hardware using the
illustrations on pages 2 and 3.
sTeP 1:
(see fiGure 1)
•
Attach the left and right side braces (6 and 7) to the
cross brace tubes (5) using four 5/16-18 x 1-1/4 hex
bolts (P) and .312-18 Nylock hex nuts (F).
•
Attach the hopper bag (8) to the brace assembly by
inserting the Velcro straps on the hopper bag (8)
through the slots in the brace assembly.
P
6
F
P
P
F
8
5
P
F
7
P
F
5
7
fiGure 1
sTeP 2:
(see fiGure 2)
•
Attach the lower kickstand tubes (3) to the sweeper
housing assembly (11) using four 5/16-18 x 1-1/2 G5
hex bolts (G) and .312-18 Nylock hex nuts (F).
G
11
F
4
3
F
G
F
G
F
fiGure 2
Publicité
Table des Matières
