Explanation Of The Application Range - Textron Klauke mini+ ESG 25-L Mode D'emploi

Instruction Manual Cutting Tool
ESG 25-L

4.2 Explanation of the application range

Our electric-hydraulic cutting tool can cut fortifi ed copper and aluminium conductors (ACSR) or cables up to a maxi-
mum diameter of 25 mm.
Attention
Use safety glasses when cutting fortifi ed conductors
If different conducting materials have to be cut, please contact the manufacturer.
Attention
Do not cut live cables or conductors. This is not an insulated tool.
The hand held tool is not supposed to be restrained in a vise. It is not allowed to use the tool in a stationary applica-
tion.
The tool is not designed for continued cutting operations. After a sequence of approximately 30-40 completed cuts
you have to make a break of 15 min. to give the tool time to cool down.
Attention
Too intensive use can cause heat damages for the tool
Attention
During the operation of electric engines sparks can occur which might ignite highly infl ammable or explosi-
ve liquids and materials
Attention
Electric-hydraulic cutting tools should not be operated in pouring rain or under water.
HE.13453_C © 11/2010
All manuals and user guides at all-guides.com
5
GB