Technical Data - Macrom Syn Tech 4.075 Manuel D'emploi

Power IHF 202
RMS Power at (12.5 Volts DC)
Front/Rear at 1 kHz < 0.08 % THD+N at 4 Ohm
Front/Rear at 1 kHz < 0.5 % THD+N at 2 Ohm
Front/Rear at 1 kHz < 0.5 % THD+N Mono at 4 Ohm
Pre-Out Sensitivity
High pass, Front and Rear
Low pass, Front and Rear
Crossover slope
Response in frequency +/- 1 dB
Total harmonic distortion
Weighted IHF A Signal-Noise Ratio
Input sensitivity - Impedance
Loudspeaker impedances
Stereo
Mono
Power supply
Weight
Dimensions
Due to the continual incorporation of improvements in this product, the characteristics and
design may be subject to variation without prior notice.
All manuals and user guides at all-guides.com

TECHNICAL DATA

(30-600)Hz
(30-600)Hz
10
650W
4 x 75 W
4 x 150 W
2 x 300 W
1:1
12 dB/Octave
10 - 50.000 Hz
0.08%
> 100 dB
200-4000 mV/22 kOhm
min. 2 Ohms
min. 4 Ohms
14.4 V DC
(11 - 16 V permissible)
5,1 kgrs
212(I) x 67(H) x 445(D) mm