Operating Conditions; Symbol Definitions - DJO EXOS Instructions

f Remove product from oven when timer rings.
f The Thermal Oven Extension Ring Kit (G) should be used for heating larger braces or brace
components so the heating element (A) does not come in direct contact with any portion of the
product while being heated. This kit is sold separately.
f Do not heat products longer than 15 minutes.
f Do not touch the dome (B) or any surface on the heating area during operation. The air inside the
dome (B) can reach 235°F (113°C) which makes the surfaces very hot and may cause burns.
f Do not open the dome (B) or remove the heating element (A) while it is still operating. To power
off the oven turn the timer dial to "OFF" position. (See Control Dials (H) for Figure 3)
f Unplug the unit and wait until cool before cleaning.
f For all parts, other than the heating element (A), disinfect by wiping alcohol or wash with mild
soap and water then dry with towel or allow to air dry.
f Protect the metal and plastic surfaces, do not use abrasive cleaners.
f The outer surface of the heating element (A) can be cleaned by wiping it with a damp cloth.
f Do not submerge the heating element (A).
f Avoid using any cleaning agents that could cause a hazard as a result of a reaction with parts of
the equipment or with material contained in it.
f Oven Dimensions: 15.4" x 14.5" x 15" (39.1 cm x 36.8 cm x 38.1 cm)
f Extension Ring (C) Dimensions: 3.4" (8.6 cm)
f Weight: 9.1 lbs (4.1 kg)
f Power input 120V version: 120 Vac 60 Hz 11 A
f Power input 230V version: 230 Vac 50/60 Hz 6 A
f Standards: EC 61010-1, 2nd Ed; CSA 22.2 No. 61010, 2nd Ed; UL 61010-1, 2nd Ed; DIN EN 61010-1;
DIN EN 61010-2-030
f Duty Cycle: Continuous
f Oven Temperature Range: Ambient to 220°F (104°C) +/- 15%
f Timer: 0-30 minutes

OPERATING CONDITIONS

f Operating Temperatures: 60°F (16°C) to 80°F (27°C)
f Relative Humidity: 10% to 90%
f Atmospheric Pressure: 650 mmhg to 790 mmhg

SYMBOL DEFINITIONS

Refer to Exos Oven operator's manual for usage instructions.
Refer to Exos Oven operator's manual for dangers, precautions and warnings.
The infrared heating system including the heating element (A), dome (B), extension ring (C), rack
(D), liner pan (E), base (F) and all electrical components to be free from defects and workmanship
under normal use, when operated in accordance with the above written instructions provided with
each unit for one (1) year from date of purchase. DJO, LLC will repair or replace, at our discretion, any
part of the heating system.
This Limited Warranty is voided if repairs are made by an unauthorized dealer or the serial number
data plate is removed or defaced. Normal deterioration of finish due to use or exposure is not
covered by this Warranty. This Limited Warranty does not cover failure, damages or inadequate
performance due to accident, acts of God (such as lightening), fluctuations in electric power,
alterations, abuse, misuse, misapplications, corrosive type atmospheres, improper installation,
failure to operate in accordance with the DJO, LLC's written instructions, or abnormal use.
f Lead (Pb) 0.1% by weight
f Cadmium (Cd) 0.1% by weight
f Polybrominated Biphenyls (PBB) 0.1% by weight
f Mercury (Hg) 0.1% by weight
f Hexavalent Chromium (Cr-VI) 0.1% by weight
f Polybrominated Diphenyl Ethers (PBDE) 0.1% by weight
f The Exos Oven is 100% RoHS compliant (RoHS stands for the Restriction of Hazardous
Substances).
C L E A N I N G A N D C A R E I N S T R U C T I O N S
S P E C I F I C A T I O N S
R o H S R E S T R I C T E D M A T E R I A L S
M A T E R I A L & T O X I C O L O G I C A L P R O F I L E
M A X I M U M C O N C E N T R A T I O N
NOT MADE WITH NATURAL RUBBER LATEX.
C A U T I O N
W A R R A N T Y
Rx ONLY.
3