Individual Parts - dji ROBOMASTER EP Core Guide

User Manual
Check all of the included parts listed in the In the Box section in the quick start guide, and read the
disclaimer and safety guidelines. Complete the assembly with the help of the quick start guide and the
video tutorial on DJI's official website (http://www.dji.com). Refer to the user manual on DJI's official website
for more comprehensive information. Make sure you fully understand all safety guidelines, government
regulations, and the functionality of each individual part. If you have any questions or problems during the
assembly, maintenance, or use of the product, contact DJI or a DJI authorized dealer.

Individual Parts

Regarding Genuine and Functional Parts
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI
certified manufacturers may cause system malfunctions and compromise safety.
2. Make sure there are no foreign objects inside of the product or its components, such as oil, sand, or
water.
3. Make sure the robot and its components are all in good working order, damage-free, and functioning
properly. Components include, but are not limited to, the intelligent controller, chassis, and Intelligent
Battery.
4. DO NOT disassemble the parts that have been installed before delivery. Unauthorized disassembly
may cause malfunctions and affect the functionality and safety of the product.
5. Follow the assembly instructions for cable connection and wiring to avoid cable damage. DO NOT
forcibly pull the cables when plugging and unplugging them. Otherwise, the cable connectors may be
damaged.
Chassis and Mecanum Wheels
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. If the Mecanum wheels or chassis are moving at a high speed, they could potentially cause injury or
property damage. Make sure to pay attention when the robot is moving at a high speed.
2. Select a wide space when controlling the robot to move at a high speed. Avoid crashing into any hard
objects or walls at a high speed.
3. DO NOT use excessive force when tightening the screws during assembly and disassembly.
The thread-locking fluid on the screws is intended for one- time use. For repeated assembly and
disassembly, thread-locking fluid is required.
4. It is recommended to use the robot on flat surfaces such as wooden floors, cement, or carpets.
Uneven surfaces such as sand may damage the Mecanum wheels or motors. DO NOT use the robot
on wet ground or outdoors in rainy or snowy environments.
©
2020 DJI All Rights Reserved.
3