Denon DJ Axis 8 Guide D'utilisation page 3

Example 2: 2 loudspeakers with mixer
Power Power
Mixer
Connect the left and right output of your mixer to Input 1 of each loudspeaker using XLR or
1/4" (6.35 mm) TRS cables. Make sure the Line/Mic Selectors are set to Line.
Tip: To send the same mix to both loudspeakers, connect both channels of your mixer to the
Inputs 1 and 2 of one loudspeaker, set its Input 1/Mix Selector to Mix, and then connect that
loudspeaker's Thru Output to Input 1 of the other loudspeaker. Both loudspeakers will then
play identical summed mono mixes.
Tip: To add extension loudspeakers in a "daisy chain" configuration, connect the Thru Output
to the input of your additional loudspeaker. Be sure to set the Input 1/Mix Selector to the
desired setting.
Example 3: 1 subwoofer and 2 loudspeakers with mixer
Subwoofer
Power Power
Mixer
Using XLR or 1/4" (6.35 mm) TRS cables, connect the left and right output of your mixer to the
inputs of your subwoofer, and then connect each high-pass output of the subwoofer to
Input 1 of each loudspeaker. Make sure the Line/Mic Selectors are set to Line.
3