Adjusting The Time; Using The Chronograph - TW Steel GRANDEUR Mode D'emploi

USE OF THE CROWN
To adjust the time or set the date pull the crown out
to the 1st or 2nd position. After adjusting, push the
crown back on the case.

ADJUSTING THE TIME

Pull the crown out to the 2nd click position so that the
second hand stops at (0) position. Turn the crown to set
the hour and minute hands.
ADJUSTING THE DATE
Pull the crown out out to the 1st position. Turn the crown
anti-clockwise to set the date. After the date has been set,
push the crown back to the normal position.

USING THE CHRONOGRAPH

The chronograph is able to measure and display the time in 1/1
second united up to an maximum of 1 hour. The chronograph can be
started and stopped each time button A is pressed. Pressing button
B resets the chronograph. All hands return to their (0) position. If
the chronograph second hand does not return to the (0) second
position after the chronograph has been reset or after replacing the
battery, you should do the following: Pull the crown out to the 2nd
position. Press button A to set the chronograph second hand to
the (0) position. The chronograph hands can be advanced rapidly
by continuously pressing button A. Once the chronograph second
hand has returned to the (0) position, return the crown to its normal
position.
Hour hand
Chronograph minute
hand
Chronograph second
hand
Second hand
Date
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
(0) position
Button A
Minute hand
24-hour hand
Crown / normal
crown position
Button B