ebgo CC48 Guide Du Propriétaire page 31

INSTALL THE PEDALS
Please use the supplied 15mm wrench to install the pedals. Also, be sure
to install the pedal with the yellow tights on the left side and the pedal with
the red tights on the right side of the bike.
Securely tighten the pedals by turning clockwise for the right pedal
(RED) and counterclockwise for the left pedal (YELLOW).
STEM WITH HANDLEBAR
Use the 6mm key supplied in the pedal box
Align the stem and the front wheel so that it is centered correctly
Make sure you do not exceed the maximum height of the stem.
Squeeze the stem as far as possible.
Allen screw 6mm
Owner's Manual
28
EBGO-Guide 2019-EN-V7.indd 28-29
Maximum height
INSTALL THE BASKET & FRONT LIGHT
Please use the supplied 5mm Allen Key and the screws provided to install the
basket on the frame. Once that is done, use a scredriver and the screw provi-
ded to attach the front light to the basket.
THANK YOU AGAIN FOR
CHOOSING EBGO AND
DO NOT HESITATE TO
CONTACT US FOR ANY
QUESTIONS!
Daniel Castonguay
Technical Manager
support@ebgo.com 1 844 678-3246 (ebgo)
29
2019-04-17 16:46