Appendix; Connecting Jongo To Your Wireless Network Using Push Button Configuration - PURE Jongo A2 Mode D'emploi

Appendix

Connecting Jongo to your wireless network using
Push Button Configuration
You can use Push Button Configuration to connect Jongo to your wireless
network if WPS is supported by your router. Refer to your router user guide for
more information on WPS.
1. Press and hold the WiFi button on Jongo. Jongo's Power light will pulse green
2. When Jongo's Power light is steady green, Jongo has successfully connected
Note: The WPS function may be disabled by default in some WPS-compatible
routers. Consult your router documentation for more information.
20
Jongo-A2-V1-Amer.indb 20
while Jongo attempts to connect to your network.
to your network using Push Button Configuration. You will now be able to start
streaming tracks to Jongo. See page 15.
4/9/2013 2:32:26 PM