Cartrend 146000 Notice D'instructions Originale page 20

4) Using and handling power tools
a) Do not overload the power tool. Use the correct
power tool for the job. With the appropriate power
tool you will work better and more safely within the
stated performance range.
b) Do not use a power tool if its switch is defec-
tive. A power tool that can no longer be turned on
and off is dangerous and must be repaired.
c) Disconnect the plug from the socket and/or
remove a detachable battery before adjusting
the settings, changing insert tool parts or put-
ting the power tool away. These safety measures
prevent unintended starting up of the power tool.
d) Keep unused power tools out of the reach of
children. Do not allow anyone to use the power tool
who is unfamiliar with it or has not read these
instructions. Power tools are dangerous if they are
used by inexperienced people.
e) Maintain power tools and insert tools with
care. Check whether moving parts operate properly
and do not jam, whether parts are broken or dam-
aged in such a way that this adversely affects the
working of the power tool. Have damaged parts
repaired before using the power tool. Many acci-
dents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Carefully
looked after cutting tools with sharp cutting edges
stick less frequently and are easier to control.
g) Use power tools, accessories, attachments etc.
in accordance with these instructions. Bear in
mind the working conditions and the work to be
carried out. Using power tools for purposes other
than those for which they are intended can lead to
dangerous situations.
h) Keep handles and grip surfaces dry, clean and
free of oil and grease. Slippery handles and grip-
ping surfaces do not allow safe operation and
control of the power tool in unforeseen situations.
20
146000_Schlagschrauber_BAL_191210.indd 20 146000_Schlagschrauber_BAL_191210.indd 20
All manuals and user guides at all-guides.com
5) Service
a) Only allow qualified specialists to repair your
power tool and only allow them to use original
spare parts. This will ensure that the power tool
remains safe.
II. SPECIAL SAFETY INSTRUCTIONS FOR IMPACT
WRENCHES
Hold the device at the insulated handle
surfaces when carrying out work where
the insertion tool light hit hidden power
lines. Contact with a live wire can also
electrify metallic parts of the device in turn
causing an electric shock.
16.12.19 17:03 16.12.19 17:03