Fagor FG2241 Manuel D'instructions page 12

4. Do not use 570ml for grinding function, not matter using what kinds
of ingredient in 570ml bottle, must come with liquid, dry grind is not
allow.
When overload, motor will automatically stop, please unplug, empty cup,
wait for 30minutes to cool down motor, depends on environment temperature,
after cool down can use again.
1. Fill the inside of the cooler stick up to the maximum level indicator.
2. Keep the cooler stick apparatus in the freezer until the water in the
apparatus is frozen.
3. Once the water in the apparatus has become ice, place it into the bottle and
close the lid.
Cleaning
Do not use abrasives, scourers, alcohol, etc to clean the appliance.
Never immerse the motor unit in water and never clean it in the dishwasher.
1. Unplug the appliance and disassemble it.
For extra thorough cleaning, you can also remove the sealing ring and non-slip
ring.
2. Clean the bowl, the lid, the blade unit, the sealing ring and the non-slip ring
in the warm water with some washing-up liquid.
3.Clean the motor unit with a moist cloth.
Environment
Do not throw the appliance away with the normal household waste at the end
of its life, but hand it in at an official collection point for recycling. By doing this
you will help to preserve the environment.
PLEASE NOTE
- DO NOT SWITCH ON THE APPLANCE WITH THE ACCESSORIES
STORED IN THE BOWL.
- NEVER SOTRE THE TWO CUTTING AND SLICING BLADES INSIDE
THE BOWL : AN INCORRECT OPERATION COULD SERIOUSLY
DAMAGE THE PRODUCT.
Cooler Function