inventiv 202093 Notice page 22

All manuals and user guides at all-guides.com
202093 ROTARY HAMMER 1500W
4. HAMMER DRILL FUNCTION (See Fig. D1, D2)
1. Adjust the hammer or chisel action selector to posi-
2. Adjust the hammer or drilling action selector to posi-
3. You are now set up for hammer drilling into masonry.
NOTE: Press the selector switch lock button before
adjusting the dial selector everytime.
5. DRILLING FUNCTION (See Fig. E1, E2)
1. Adjust the hammer or chisel action selector to posi-
2. Adjust the hammer and drilling action selector to
3. You are now set up for drilling function.
NOTE: Press the selector switch lock button before
adjusting the dial selector everytime.
6. CHISEL FUNCTION (See Fig. F1, F2)
1. Adjust the hammer and chisel action selector to posi-
2. Adjust the hammer and drilling action selector to
3. You are now set up for chisel work using chisel ac-
NOTE: Press the selector switch lock button before
adjusting the dial selector everytime.
switch is positively locked in chisel mode position. If not,
it could cause a hazard.
7. DUST COVER (See Fig. G)
Before drilling, fit the dust cover over the drill bit.
SAFETY AND OPERATING MANUAL
tion " ".(See Fig.D1)
tion " " .(See Fig. D2)
tion " " .(See Fig. E1)
position " ".(See Fig. E2)
tion " " .(See Fig. F1)
position " ".(See Fig.F2)
tion.
WARNING: You must make sure that the selector
CAUTION: Always wear eye protection with this tool.
22