Installation Overview - Firstech DroneMobile DR-2000 Guide D'installation

These installation steps are very important. Please follow them carefully when
installing your first and every DroneMobile system. The Drone's SIM MUST be
activated prior to powering on the DR-2000.
Install DroneMobile (and alarm/remote start system if applicable). Leave harnesses unplugged
STEP 1:
from DR-2000.
Go to https://live.dronemobile.com/login and click on "New Dealer Registration." If you
STEP 2:
already have an account, login with your Dealer account information.
Register the Drone unit using the 20 digit serial number. (Click on "New Dealer Registration" if
STEP 3:
this is your first time registering a Drone unit.) Wait for the Activation Status to change to
"Active."
Once the status changes to "Active" you may now plug the harnesses into the DR-2000.
STEP 4:
Wait for the unit to achieve cell lock (blue LED flashes slowly) Proceed to the "Settings" page.
STEP 5:
Complete the "Asset Description" and "Installation Options" sections.
STEP 6:
Failure to properly select this feature will require a call to tech support to reset.
Configure the other settings and click "
Once you are on the "
STEP 7:
that the unit is fully functional before releasing the vehicle.
Once you log out of this session, you will not be able to control the unit again
and the user will not have access to GPS functions unless they upgrade to the
Give your customer the 20 digit serial number and Quick Start Card and have them register
STEP 8:
the unit in their name by going to https://live.dronemobile.com/login and clicking on "New
User Registration." If they currently have an account, have them log in and "Manage Account"
> "Add/Remove Vehicle(s)."
3 | Copyright 2011 Firstech, LLC.
All manuals and user guides at all-guides.com
TM
DR-2000 Install Guide
page, test all of the features including GPS tracking to verify
Controls"
Premium Plan.
to save your settings.
Save"

Installation Overview