Chrono-Mode - Minox Suntimer Mode D'emploi

All manuals and user guides at all-guides.com
4 Functions
The CHRONO-Mode
(stopwatch)
Keep pressing the mode button
until "CHRONO" is displayed.
After 1.5 seconds the CHRONO-
mode is displayed automatically.
Start time measurement by
pressing the up button and
stop by repeatedly pressing the
up button. To reset the stop-
watch press the set button and
Set
hold for at least 1.5 seconds until
(> 1,5 sec.)
"CLR" (clear) is displayed and
you get back to initial display.
x Man_Suntimer_RZ.indd 48 04.10.2006 18:13:56 Uh