Technical Data - BOMANN UM 1354 CB Mode D'emploi

WARNING:
• Always remove the plug before cleaning!
• Do not immerse the motor housing in water for cleaning in any
case. Otherwise this might result in an electric shock or fire.
• The blades on the knife block are very sharp. A risk of injury
exists!
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
NOTE: Preliminary Cleaning
Half fill the mixing vessel with water and turn the switch to
"P" for approximately 10 seconds. Then pour out the liquid.
• For thorough cleaning, please remove the mixing vessel.
• Always disassemble the mixer after use.
WARNING: Danger of injury!
The blades on the blade block are sharp. Please be careful
when dismantling, cleaning and reassembling the individual
parts.
• Unscrew the screw top in a clockwise direction from the
carafe. Remove the blade block and the sealing ring from
the screw top. When removing the safety disc, use the
thread on the carafe.
Carafe
The carafe can be cleaned in the dishwasher or warm soapy
water.
Safety Disc, Sealing Ring, Blade Block and Screw Top
• These parts should only be briefly rinsed off with hot
water.
• After all parts have been cleaned and dried, assemble
your mixer as described under Installation.
Housing
Only a moderately moist cloth should be used for cleaning
the outside of the device.
UM1354CB_IM_new
All manuals and user guides at all-guides.com
Cleaning
Problem
The device
is not
working.
Model:................................................................... UM 1354 CB
Power supply:....................................... 220 - 240 V~, 50 / 60 Hz
Power consumption: ....................................................... 600 W
Protection class: ......................................................................
Short­term operation: ...................................................... 1 Min.
Filling quantity: ......................................................0,5 ­ 1,5 Litre
Net weight: ..........................................................approx. 3,1 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest regulations.
Troubleshooting
Possible Cause Remedy
The device has no Check the socket with
power supply. another appliance.
Plug in the mains plug
correctly.
Check the main circuit
breaker.
Wrong switch setting. Check the position of
the rotary switch.
The device is fitted Check that the mixer
with a safety switch.
vessel and safety disc
This prevents the are firmly installed.
motor from starting
up unintentionally.

Technical Data

17.03.17
33